Shandong Aipuxin Automation Instrument Co., Ltd.

Technical Parameter

Measured medium	Various liquid media
Display mode	It can display density, concentration and temperature, LCD dot matrix screen with backlight display, and Chinese and English menus can be switched
Medium temperature range	-40℃～150℃
ambient temperature	-40℃～80℃
Measuring range	0 ~ 2.5g/cm3 (default, adjustable)
Medium viscosity	600cp (standard)
Temperature effect	±0.1 kg/m ³/ ° C (after temperature compensation) pressure effect: negligible
Pressure range	≤10Mpa
Shell material	Die cast aluminum alloy
Explosion proof grade	Exd â…¡C T6 Gb
Enclosure protection class	IP65
Connection mode	DN50 (standard), thread, flange and sanitary clamp of various specifications
Supply voltage	24VDC
output signal	4-20mA, RS-485, MODBUS protocol
Electrical interface	M20*1.5
measurement accuracy	0.001g/cm3（0.6~1.2g/cm3Range）
resolving power	0.00001g/cm3Repeatability: 0.0002g/cm3
Contact liquid material	316, 2205 duplex stainless steel, Hastelloy , titanium, tantalum, zirconium,PTFE, PFA

 

Company Introduction

 

Online tuning fork density meter

In the whole process of installation and sampling should pay attention to the following aspects:

1. The gas is very sensitive to the harm of temperature, and it is necessary to maintain temperature control to meet the requirements of calibration and adoption. The temperature measuring component on the densitometer shall be a corrected Pt-100 component and shall be immediately placed in the densitometer measuring chamber.

2. In order to reduce the recoil time to very little, the friction resistance drop of all pipeline operating systems should be small, so that the air pressure passing through the instrument is as close to the working pressure of the sampling point as possible.

3. If there is residue in the sample gas that will cause environmental pollution, a filter device with high efficiency should be set; And pay attention to avoid changes in the composition of the sample gas caused by the temperature drop caused by the sample gas pressure.

4. The flow speed of sample gas should be strictly controlled.

5. The installation and actual operation regulations of risk areas (combustible gas) should be met.

6. Online instruments and equipment should be used to gather the sampling head, and its installation should be in accordance with the requirements of ISO17051.

7. Special attention should be paid to preventing noise and pipeline vibration from harming the vibrator.

 

Product Details

 

 

Quality assurance

1. High quality aluminum alloy shell, stainless steel electrical interface, explosion-proof certification is more suitable for hazardous and explosive working conditions.

2. The high-definition large screen is convenient for debugging, with accurate digital display and clear and easy to understand. The liquid receiving part can be selected: 3162205, zirconium, titanium alloy, Hastelloy, tantalum, PTFE. High quality stainless steel nameplate with clear parameters.

 

Product Application

Plug-in online tuning fork hydrometer is widely used to measure the density of lime slurry, oil field refining, desulfurization circulating slurry, oil tank density, salt pond density, sewage density, battery sulfuric acid density, cutting fluid density, electroplating pond density, food slurry density, dairy product density, alcohol density.

CLASSIFICATION

Threaded type

Installation method: G1.5 "threaded fork material: 316 stainless steel

 

Flange type

Installation method: DN50 PN16 flange fork material: 316 stainless steel

 

Sanitary chuck

Installation method: Sanitary 1.5 "chuck fork Material: 316 stainless steel

 

Non standard customization 
Corrosion resistant and high-temperature type 
Suitable for: highly corrosive environments 
High temperatures above 100 ℃
Measuring cylinder 
Suitable for high-precision measurement of small pipelines 
Special alcohol measurement types 
Applicable to: measuring alcohol temperature and alcohol content
Thread, flange, material, high temperature resistance, and corrosion resistance can be customized according to the customer's working conditions

 

Installation Case

 

 

Production Environment

 

 

Certifications

Complete Epson certificates

Customer Visiting

Cooperation countries: South Korea, Senegal, India, Russia, Japan, France, Thailand, Singapore, Malaysia, North Korea, Laos, Philippines, Germany, United States, United Kingdom, exporting to over 80 countries.

 

About packaging

Imported foaming machine packaging equipment protects products, ensuring that goods are less damaged during long-distance transportation!

Including: 1 product, accessory, manual, 1 certificate of conformity, 1 shipping list, and 1 installation manual

 

Transport

Carrier: TNT, UPS, FEDEX, DHL international logistics ensure the timeliness of transportation.

 

http://www.aipxin.com/